This is the most vital factor: fiber media converters work in pairs for transmission and conversion. Typically, network media converters are often used to connect newer Gigabit Ethernet (1000 Mbps) cabling to older 10Base-T or 100Base. Network Media includes connectivity devices for industrial networks including Ethernet, ControlNet and DeviceNet. They receive data from one type of cable and convert the signals for transmission along another cable type. Reminder: In the above illustrations we showed fiber media converters being used in pairs. Network media converters are used to interconnect different types of cables within an existing network. If the port support 10G and the transmission distance between the two converters is less than 100 meters, then a SFP+ to SFP+ AOC can be used. Additional optical transceiver should be inserted into the port firstly, then the two media converters can be connected via the ports of these two optical transceivers. Under this circumstance, two optical transceivers are needed. The two fiber media converters should be supported by electricity.Īs for fiber media converter with SFP, SFP+ or XFP transceiver interface, the way to connect two media converters is a little bit different. The RJ45 port of each media converter is connected to 10/100Base-TX HUB and computer server separately. This will be explained in the following.įor fiber media converters with LC/ST/SC/MT-RJ interfaces, simply use a fiber patch cable with the corresponding connector type to connect the interfaces of two media converters directly. For SFP, SFP+ and XFP transceivers, things are different. Among which the ST, SC, LC, MT-RJ and RJ 45 interfaces of fiber media converters can be connected to target devices directly by patch cords. The following picture illustrates the commonly used interfaces. Speaking of employing fiber media converters to the existing network, firstly we’d better know the interfaces of them. While for copper, ports are all designed for RJ45 copper cables. For fiber, there are ports designed for optical transceivers (SFP, XFP, etc.), and for fiber patch cables (SC, LC, etc.). Media converters have two types of ports that for copper and fiber respectively. When extending copper UTP Ethernet cabling at distances beyond 100 m (which is maximum for UTP) to fiber optic cabling, a fiber media converter is typically used. How to Integrate Copper and Fiber Network with Media Converters?
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |